Marcas representadas Preguntas frecuentes Contacto
Componentes
Juntas de Apantallamiento
Juntas metálicas - Fingerstrips
Juntas blandas - Gaskets
Elastómeros conductores
Juntas de malla
Materiales de apantallamiento
Honeycombs
Cintas metálicas conductoras
Cajas apantalladas para PCB
Fundas para cable
Componentes
Ferritas para cable
Ferritas para PCB
Inductancias para PCB
Convertidores DC-DC
Power Elements
Filtros EMI-EMC
Cámaras apantalladas y anecoicas
Faraday y Tempest
Anecoicas
Medida de antenas
Aeronáutica - Militar
Reverberantes
Celdas TEM - GTEM
Cajas apantalladas
Absorbentes electromagnéticos
Posicionadores
Accesorios
Instrumentación
Inmunidad Radiada
Inmunidad Conducida
Ensayos de Emisiones
Receptores EMI
Armónicos y Flicker
LISN y accesorios
Centros de Control
Amplificadores
Antenas
Kits de antenas
Sondas de campo
Sonda isotrópica EFCube
Sondas isotrópicas RadiSense
Mini sondas de campo cercano
Descargas electrostáticas
Software de ensayos
Escáner EMC - EMxpert
Fuentes de alimentación AC
Fuente de alimentación modular - 300XAC
Fuente de alimentación lineal - LS Series
Baja frecuencia
Accesorios
Seguridad eléctrica
Linea avanzada
Linea básica
Sistemas de ensayos seguridad eléctrica
Escáner - Matriz conmutación
Software de automatización
Sistemas de ensayos
EMC
Emisiones conducidas
Emisiones radiadas
Inmunidad conducida
Inmunidad inducida (BCI, -4-6)
Inmunidad radiada
Ensayos contra rayos
Normas Telecom
Normas militares
Normas aeronáuticas
Ensayos de componentes
Varistores, supresores, TVSS
Condensadores
Resistencias
Interruptores
Contadores eléctricos
Relés de protección
Ensayos de aislamiento
Medida de antenas
Sistema Compacto - RFxpert
Medidas en campo cercano
Medidas en campo lejano
Sistemas RF
Software
Accesorios para medida de antenas

Enlace a RF

Seguridad Eléctrica
 

Normas Telecom

Lightning Tests: Telecommunication

Below you find a selection of EMC PARTNER's products for lightning tests on telecommunication equipment based on the following standards or recommendations:

ITU/IEC Impulse 6kV

  • MIG0603IN2

Waveforms (Range): 10/700 µs (up to 6 kV)
CWG 1.2/50, 8/20 µs (6 kV, 3kA)


Coupling: CWG 1.2/50, 8/20 µs only
Power supply a.c. L-N 480 V/16 A
Power supply a.c. L/N to PE 280 V
Power supply d.c. 110 V/16 A
Standards: ITU-T K.44, K.17, K.20, K.21, IEC/EN 61000-4-5, IEEE C.62.41, C62.45

  • MIG0603EN

Waveform (Range): CWG 1.2/50 µs, 8/20 µs (6 kV, 3 kA)
10/700 µs (up to 6 kV)
1.2/50 µs (up to 6 kV)


Coupling: a.c.: CWG 280 V/16 A
d.c.: CWG 110 V/16 A
Standards: IEC 61000-4-5, ITU-T K.44 10/700 µs, ITU-T K.21, IEC/EN 60950

  • TRA2000IN6 and CDN-UTP

Ideal combination for EMC transient tests on telecom equipment.

Waveforms:
(Range)
CWG 1.2/50, 8/20 µs (6 kV, 3 kA)
10/700 µs (up to 6 kV)
100kHz ring wave (up to 6 kV)
EFT: 5/50 ns (up to 4.4 kV)
ESD: CD/AD (up to 8 kV/15 kV)
DIPS: all levels voltage and time


Standards: IEC 61000-4-11, IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-2, ITU-T K.44, K.20, K.21
 Coupling: Power supply a.c. L-N 280V, 16 A
Power supply a.c. L/N to PE 280V
Power supply d.c. 110V, 16 A
Further Accessories: TEMA (Test Manager Software)
CDN2000A-06-32, CN2000TT MC
  

ITU/IEC Impulse 12kV

  • MIG1206 + CDN-MIG12-32

The maximum test levels are specified in the ITU-T K.20 and K.21 documents:

  • for 10/700 µs up to 6 kV and
  • for combination wave 1.2/50, 8/20 µs up to 10 kV.

Waveforms:
(Range)
CWG 1.2/50, 8/20 µs (12 kV, 6 kA)

Standards: IEC 61000-4-5, ITU-T K.44, K.20, K.21
Coupling using CDN-MIG12-32: Power supply a.c. L-L/N 480V, 32 A
Power supply a.c. L/N to PE 280 V
Power supply d.c. 280 V, 32 A
Further Accessories: TEMA (Test Manager Software)

 
  • MIG1206-xP-T

The MIG1206-xP-T is a hybrid generator with two voltage wave shapes; 1,2/50µs at "no load" and a current wave form 8/20µs at short circuit combined with the 10/700µs "Telecom" impulse. An integrated automatic coupling/de-coupling network completes the system.

Waveforms
(Range):
CWG 1.2/50 µs, 8/20 µs (12 kV/6 kA)
Telecom Pulse:
10/700µs open circuit (up to 6 kV)


Coupling: 1-Phase
L-PE, N-PE, L-N
3-Phase
L1-PE, L2-PE, L3-PE, N-PE
L1-L2, L2-L3, L1-L3, L1-N, L2-N, L3-N
L1 + L2 or L1 + L3 etc. to any other line
Current:
32Aac
25Adc
Standards: IEC61000-4-5, ANSI C62.41, IEC61643-1, IEC60060-1, ITU-T K44, ITU-T K20, ITU-T K21
Accessories: TC-MIG24 HL test cabinet:
High voltage outputs on front of MIG1206-xP-32
Component and circuit test up to 12kV within the test cabinet



  • MIG1203T

Waveform (Range): 10/700 µs (up to 12 kV)

Standards: ITU-T K.44, ITU-T K.17, ITU-T K.20, ITU-T K.21, ITU-T K.22, IEC 61000-4-3
Options: 1.2/50 µs up to 12 kV
CWG up to 6 kV
10/1000µs up to 12 kV
Required Accessory:











TC-MIG24 or CN-MIG24

ITU/IEC Impulse Current

  • MIG0624TEL

Waveform (Range): 8/20 µs (up to 24 kA)

Coupling: cable 1 m with test adaptor
Standards: ITU-T K.44, K.17, K.20, K.21
Options: Resistor network
Required Accessory:








TC-MIG24 or CN-MIG24

  • MIG0612T-K12

Waveforms
(Range):
8/20µs (up to 12kA)
10/350µs (up to 4kA)
10/1000µs (up to 200A)


Standards:

















ITU-T K12
Required Accessories: TC-MIG24 HL test cabinet


 
  • MIG0624T-K12

Waveforms
(Range):
8/20µs (up to 24kA)
10/350µs (up to 8kA)
10/1000µs (up to 400A)


Standards:



















ITU-T K12
Required Accessories: TC-MIG24 HL test cabinet


 

ITU Power Induction/Contact

  • MIG-ITU-K44

A device for power induction testing at frequencies of 50Hz and 60Hz

Rating: 50V up to 1690V
continuous power up to 3.5kVA
short time power up to 7kVA
timer 0.1 up to 9.9s


Coupling:






















2 x 200 Ohm
2 x 600 Ohm

  • NW-K44PC

Accessory to the TRA2000 with DIP circuit.
NW-K44PC enables power contact testing at frequencies of 50Hz and 60Hz.

Power Contact: Rating: 230V up to 23A

Coupling: 2 x 300 ohm
2 x 600 ohm
2 x 1000 ohm
2 x 1200 ohm

  • TRA OPTION NW-K44PI

Option to NW-K44PC.

 
Power induction network includes transformer and current limiting resistors.

Accessories:





PCPI160E



 

FCC part68

  • MIG0603FCC

Waveforms (Range): CWG 1.2/50 µs, 8/20 µs (6 kV, 3 kA)
9/720 µs, 5/320 µs (6 kV, 150 A)
10/160 µs, 10/160 µs (1500 V, 200 A)
10/560 µs, 10/560 µs (800 V, 100 A)
2/10 µs, 2/10 µs (2500 V, 1000 A)


Coupling: a.c.: CWG, 280 V/16 A
2/10 µs, 280 V/16 A
d.c.: CWG, 110 V/ 16 A
2/10 µs, 110 V/16 A
Standards: IEC 61000-4-5, ITU-T K.44, FCC 68 part 68

 

Telecom Coupling

  • CDN-UTP and CDN-UTP8

The CDN-UTP (4 lines) and the CDN-UTP8 (8 lines) are sophisticated coupling and de-coupling networks for superimposing surge impulses on balanced communication lines in accordance with IEC61000-4-5, ITU-K20, K21 and FCC part 68. The CDN-UTP and CDN-UTP8 are specially designed to fulfil the requirements of modern high speed communication systems.

Rating: Surge 1.2/50, 8/20 µs: max. 6.6 kV
Surge 10/700 µs: max. 6.0 kV


Application: tested and recommended:
- Analogue subscriber lines (a/b-line)
- ISDN
- ADSL resp. xDSL
- Ethernet: 10Base-T
- USB
- Interbus
- Profibus
- ASI = Actor Sensor Interface
Standards: IEC 61000-4-5, FCC part 68, ITU-K.44, -K.20, K.21
Coupling: - direct
- via 90V gas arrestor (GTD)
- via 90V gas arrestor // 100nF
- via 66V clamping diode
- different resistors: 25, 50, 100, 80, 100 Ohm
 De-coupling: - common mode inductance 20 mH
- d.c. resistance 3.5 Ohm
max. unbalanced 0.003 Ohm
Can be used with generators: TRA2000IN4, TRA2000IN6,
MIG0603IN2, MIG0603IN3, MIG0603EN, MIG0603FCC
 
 
  • CDN-KIT1000

The CDN-KIT1000 is a universal coupling/de-coupling kit for balanced telecom and communication lines.

Rating: Surge 1.2/50, 8/20 µs: max. 6 kV
Surge 10/700 µs: max. 6 kV


Application: unshielded and unbalanced telecom lines
Standards: IEC 61000-4-5, FCC part 68, ITU-K.44, -K.20, K.21
Coupling: - direct
- via 0.5µF and 40 Ohm resistor
 De-coupling: - clamping diode 27 V
- clamping diode 54 V
- clamping diode 81 V
- direct 220 V
Can be used with generators: TRA2000IN4, TRA2000IN6,
MIG0603IN2, MIG0603IN3, MIG0603EN, MIG0603FCC
 
 
  • CN10-700E25

The CN10-700E25 is a specialist coupling unit for telecom testing.

Rating: Surge 1.2/50, 8/20 µs: max. 6 kV
Surge 10/700 µs: max. 6 kV


Application: balanced and unbalanced telecom lines
Standards: ITU-K.44, -K.20, K.21
Coupling: 2 x 25 Ohm coupling with 90 V GDT
Can be used with generators: TRA2000IN4, TRA2000IN6,
MIG0603IN2, MIG0603IN3, MIG0603EN, MIG0603FCC

 



Pallars 65-71 | 08018 Barcelona (España) | Tel: +34 93 320 80 55 | Fax: +34 93 320 80 56
Política de cookies | Información legal | Contacto | Terminologia