Descargas Electrostáticas
|
Pistola de descargas electrostáticas hasta 30 KV.
ESD3000 :
Discharge mode: contact discharge (CD) or air discharge (AD).
Polarity: positive, negative or polarity change after a predefined number of discharges.
Repetition: 50ms up to 99s.
Ramps: voltage.
Number of discharges: preselectable.
Control: Remote control from a PC via RS232 optical link and TEMA software.
Remote control from TRA2000 via RS232 metallic serial link 2m length.
Standards: CD up to max. 10kV and up to level 4:
DM1: IEC/EN 61000-4-2 (10/16kV)
DM2: ISO 10605(E) (+/- 10/16kV))
DM4: MIL-883E ( +/- 10/16kV)
DM5: DO-160D (+/- 0/30kV)
DM6: IEC 61340-3-1 (+/- 8/0kV)
DM7: IEC 61340-3-2 (+/- 2.5/0kV)
Customised DM16C :
* in general:
o Cap: 100pF up to 1500pF
o Res: 0 up to 2kOhm
* manufactured:
o CAR3: ISO 10605
+ Cap: 330pF
+ Res: 330Ohm
o CAR4: ISO 10605
+ Cap: 150pF
+ Res: 2kOhm
Legend:
DM = Discharge Module
(x/y kV) = Voltage range CD and AD
CD up to max. 30kV, level x:
(requires one RM and one DN)
RM32: RM for rise time 0.7 - 1nS
RM32F: RM for rise time < 400pS
DN1: IEC 61000-4-2, ANSI C63.16, RTCA/DO-160 (30kV)
DN2: ISO TR10605E (30kV)
DN3: ISO TR10605E (30kV)
DN4: MIL-STD-1512 and MIL-STD-331 (30kV)
DN5: MIL-STD-331 (30kV)
DN6: VW TL 824-66 (30kV)
Customised DN32:
* in general:
o Cap: 100pF up to 1000pF
o Res: 0 up to 10kOhm
* manufactured:
o CAR1-JASA:
+ Cap: 150pF
+ Res: 500Ohm
o CAR5-RENAULT:
+ Cap: 330pF
+ Res: 0Ohm
Legend:
RM = Relay Module
DN = Discharge Network
(x/y kV) = Voltage range CD and AD
Accessories: For calibration:
Current waveform: ESD-TARGET2, TARGET2-50, TARGET2-500
Charging voltage: ESD-VERI
For remote control:
ESD-OPTOLINK,
ESD-TRA-LINK, ESD3000DM-EXT
Software:
TEMA, E3LOADER
For special test set-ups:
ESD-STAND
For more information please have a look at www.emc-partner.ch
|
|
|
|
|
|
