Represented companies FAQs Contact Web map
Components
Ferrites for cables
Ferrites - Inductors - Coils
Gaskets - Contact strips
Filtered connectors - Fixing elements
Shielding materials
Shielded and Anechoic chambers
Faraday and Tempest
Anechoic Chambers
Antenna measurements
Aeronautics and Military
Reverb - Mode Stir
WaveCell TEM Cell
Shielded cells
Electromagnetic absorbers
Positioners
Chamber accessories
Test Equipment
Low Frequency
Amplifiers
Antennas
Antenna Kits
Emissions Tests
EMI Receivers
Harmonics and Flicker
LISN and accessories
Conducted Immunity Tests
Electrostatic Discharges
Automotive
Probes
EFCube - Isotropic Field Probe
Radisense - Isotropic Field Probe
StarProbe - Isotropic Field Probe
FP-FH Series - Isotropic Field Probes
Small Near Field Probes
EMC test Software
EMC Scanner - EMxpert
Control Centre
AC Power Sources
Modular AC Power Source 300XAC
Linear AC Power Source - LS Series
Accessories
Electrical Safety
Advanced Line
Basic Line
Safety Test Systems
Scanner
Automation software
Test Systems
EMC Test systems
Conducted Emissions
Radiated Emissions
Conducted Immunity
Injected Immunity (BCI, -4-6)
Radiated Immunity
Lightning Tests
Telecom
Military
Avionics
Components tests
Varistors, Arresters, SPD (TVSS)
Capacitors
Resistors
Circuit breaker
Protection Relay
Watthour meter
Insulation material
Antenna measurements
Compact System - RFxpert
Near Field Systems
Far Field Systems
RF Systems
Software
Accessories for antenna tests

Visit RF SAFETY

Electrical Safety
 

Electrostatic Discharges

Electrostatic Discharges system up to 30 KV.

ESD3000 is the only ESD generator in the market using standard AA batteries to offer full flexibility to the user to replace them when needed.

ESD3000 is also unique as it can be purchased as standard IEC/EN configuration up to 16KV and can be upgraded up to 30KV with some extra accessories.


ESD3000 :

Discharge mode: contact discharge (CD) or air discharge (AD).
Polarity: positive, negative or polarity change after a predefined number of discharges.
Repetition: 50ms up to 99s.
Ramps: voltage.
Number of discharges: preselectable.
Control:    Remote control from a PC via RS232 optical link and TEMA software.
Remote control from TRA2000 via RS232 metallic serial link 2m length.
Standards:    CD up to max. 10kV and up to level 4:
DM1: IEC/EN 61000-4-2 (10/16kV)
DM2: ISO 10605(E) (+/- 10/16kV))
DM4: MIL-883E ( +/- 10/16kV)
DM5: DO-160D (+/- 0/30kV)
DM6: IEC 61340-3-1 (+/- 8/0kV)
DM7: IEC 61340-3-2 (+/- 2.5/0kV)

Customised DM16C :

    * in general:
          o Cap: 100pF up to 1500pF
          o Res: 0 up to 2kOhm
    * manufactured:
          o CAR3: ISO 10605
                + Cap: 330pF
                + Res: 330Ohm
          o CAR4: ISO 10605
                + Cap: 150pF
                + Res: 2kOhm

Legend:
DM = Discharge Module
(x/y kV) = Voltage range CD and AD


CD up to max. 30kV, level x:
(requires one RM and one DN)
RM32: RM for rise time 0.7 - 1nS
RM32F: RM for rise time < 400pS
DN1: IEC 61000-4-2, ANSI C63.16, RTCA/DO-160 (30kV)
DN2: ISO TR10605E (30kV)
DN3: ISO TR10605E (30kV)
DN4: MIL-STD-1512 and MIL-STD-331 (30kV)
DN5: MIL-STD-331 (30kV)
DN6: VW TL 824-66 (30kV)

Customised DN32:

    * in general:
          o Cap: 100pF up to 1000pF
          o Res: 0 up to 10kOhm
    * manufactured:
          o CAR1-JASA:
                + Cap: 150pF
                + Res: 500Ohm
          o CAR5-RENAULT:
                + Cap: 330pF
                + Res: 0Ohm

Legend:
RM = Relay Module
DN = Discharge Network
(x/y kV) = Voltage range CD and AD

Accessories:     For calibration:
Current waveform: ESD-TARGET2, TARGET2-50, TARGET2-500
Charging voltage: ESD-VERI

For remote control:
ESD-OPTOLINK,
ESD-TRA-LINK, ESD3000DM-EXT

Software:
TEMA, E3LOADER

For special test set-ups:
ESD-STAND



For more information please have a look at www.emc-partner.ch




Pallars 65-71 | 08018 Barcelona (Spain) | Tel: +34 93 320 80 55 | Fax: +34 93 320 80 56
Terms of use | Contact | Terminology