Waveforms (Range):

ESD (8/15 kV), EFT (4 kV), SURGE (4,1 kV), DIPS (280 V/16 A), V-VARIATION (up to 280 V/6 A). Common mode

Coupling:

a.c.: single phase 16 A/260 V
d.c.: 16 A/110 V

Standards:

IEC 61000-4-2, -4, -5, -8, -9, -11, -16, -29

Required Accessory:

ESD Mouse
CNEFT1000 coupling clamp

Waveforms (Range):

ESD (8/15 kV), EFT (4 kV), Surge (4 kV), DIPS (280/16 A), V-Variation (up to 280 V/6 A) 10/700 µs (4 kV), Ring 100 kHz (6 kV)

Coupling:

a.c.: for single phase 16 A/260 V
d.c.: 16 A/110 V

Standards:

IEC 61000-4-2, -4, -5, -8, -9, -11, -12, -16, -29, ITU K.17

Required Accessory:

ESD-Mouse
CNEFT1000

Waveform (Range):

ESD (8/15 kV), EFT (4 kV), Surge (6 kV), DIPS (280 V/16 A), V-Variation (up to 280 V/6 A), Ring (6 kV)

Coupling:

a.c.: single phase 16 A/260 V
d.c.: 16 A/110 V

Standards:

IEC/EN 61000-4-2, -4, -5, -8, -9, -11, -12, -16, -29, ANSI/IEEE C62.41, ANSI/IEEE C62.45

Options:

Option 10/100
Option External CDN coupling
Option Diagnostic 1P

Required Accessory:

ESD Mouse
CNEFT1000

Rating:

Supply Voltage (a.c. or d.c.):
L to N/PE 240 V, L to L 480 V

Supply Current:
Continuous operation (a.c. or d.c.): 3 x 32 A
Continuous operation (d.c.): 1 x 64 A

Test Voltages:
Surge voltage: maximum 6.6 kV
Ring voltage: maximum 6.6 kV
EFT voltage: maximum 6.3 kV

Control:

RS232 connection from the rear side of the TRA2000 or MIG0603INx to the CDN2000A-06-32

For the selection of the coupling paths see the displays on the right.

Power supply: 90 to 240 V and 50/60Hz

Standards:

IEC 61000-4-5, ANSI/IEEE C62.41 and C62.45, IEC 61000-4-4

Option:

480V: for power supply L to N/PE 280 V and L to L 480 V

For use with these generators:

TRA2000, TRA2000IN4,
TRA2000IN6, MIG0603IN,
MIG0603IN1, MIG0603IN3,
MIG0603IN4